We will, henceforth, propose an explanation for the effect of the complexing agents on the different crystallite sizes of the final products of MgO. Figure 8 shows that the complexation sites for tartaric acid are more numerous than those for oxalic acid. The oxalic acid, due to its smaller molecular structure with only two complexation sites, can fix less Mg2+ ions compared to the larger tartrate molecule. The tartrate

molecule has more complexation sites and will be able to fix a larger number of Mg2+ ions, thus producing larger crystals. Figure 8 The complexation sites available in the complexing agents. (a) Oxalate and (b) tartrate. Figures 9 and 10 illustrate the MK-4827 purchase growth mechanisms of the MgO nanostructures. Linear

polymer networks are expected to be formed for oxalic acid during the sol-gel buy CB-5083 reaction due to the position of the two complexation sites being at the end of the polymer chain that can bind the Mg2+ ions forming the Mg-O ionic bonds as shown in Figure 9. Repotrectinib cell line For the tartaric acid complexing agent, the available four complexation sites at various positions for the attachments of the Mg2+ ions will result in branched polymer networks being formed as shown in Figure 10. The branched polymer networks that formed during the sol-gel reaction influence the crystallite growth. In the sol-gel route, the linear polymer networks can be packed close to one another to produce very dense macromolecules which decompose at a higher temperature. In contrast, the branched polymer networks form larger masses which are more unstable and can be decomposed at a lower temperature as is illustrated in Figure 11. This explanation agrees very well with the STA results of the MgO precursors. Therefore, at the same annealing condition (950°C, 36 h), the MgO-TA crystals start to nucleate earlier and have a faster growth rate compared to the MgO-OA crystals, which explains the mechanism of crystal growth and the effect of

the structure of the complexing agents on the final size of the MgO nanocrystals. Figure 9 The growth mechanism for MgO-OA. Figure 10 The growth mechanism for MgO-TA. Figure 11 A schematic diagram for crystal growth of the MgO samples. Conclusions Terminal deoxynucleotidyl transferase The use of oxalic acid and tartaric acid has been demonstrated to be very useful in producing thermally stable MgO nanostructures with a relatively uniform particle size. The growth mechanisms of the MgO nanostructures have been attributed to the very different molecular structures of the complexing agents which affected the crystal growth rate of MgO giving different crystallite sizes of the final products. The molecular structures and complexation site density play an important role in the fixing of the metal cation, Mg2+, and the formation of MgO nanoparticles. It is also clear that MgO-OA is able to produce nanocrystals not only of narrower size distribution but also of uniform morphology.