Nat Nanotechnol 2012, 7:743–748 CrossRef 19 Zhu J, Hsu CM, Yu Z,

Nat Nanotechnol 2012, 7:743–748.CrossRef 19. Zhu J, Hsu CM, Yu Z, Fan S, Cui Y: Nanodome solar cells with efficient light management and self-cleaning. Nano Lett 2010, 10:1979–1984.CrossRef 20. Air Mass 1.5 Spectra, American Society for Testing and Materials http://​rredc.​nrel.​gov/​solar/​spectra/​am1.​5/​ 21. Sai H, Kanamori Y, Arafune K, Ohshita Y, Yamaguchi M: Light trapping effect of submicron surface textures in crystalline Si solar cells. Prog Photovoltaics 2007,

15:415–423.CrossRef 22. Sai H, Fujii H, Arafune K, Ohshita Y, Kanamori Y, Yugami H, Yamaguchi M: Wide-angle antireflection effect of subwavelength structures for solar cells. Jpn Protein Tyrosine Kinase inhibitor J Appl Phys 2007, 46:3333–3336.CrossRef 23. Cassie ABD, Baxter S: Wettability of porous surfaces. Trans Faraday Soc 1944, 40:546–551.CrossRef Competing interests The authors declare that they do not have competing interests. Authors’ contributions CIY proposed the original idea, carried out most of the experimental works associated with fabrication and characterization of

samples, analyzed the results, and prepared the manuscript. JBK assisted in the experiments and measurements. YMS helped in the characterization of samples and preparing the manuscript. YTL developed the conceptual framework, supervised the whole work, and finalized the manuscript. All authors read and approved the final manuscript.”
“Background Resistance switching in metal oxide structures has attracted considerable attention because of its potential application to LY3023414 cost non-volatile memories [1–5]. Resistive random access memories (RRAMs) have many BMN 673 solubility dmso advantages over other technologies of data storage, such as much faster reading and writing rate, smaller bit Interleukin-2 receptor cell size and lower operating voltages and very high retention

time up to 10 years [2, 6–8]. In general, the metal oxide thin films are prepared by physical methods, such as radio frequency magnetron sputtering and pulsed laser deposition, etc. It not only involves high fabrication cost but also limit the size and massive production. On the other hand, chemical methodologies, such as chemical bath deposition and hydrothermal, suffer from the problems of low crystallinity, disconnection of substrate and film or high-temperature calcinations. Compared with the aforementioned techniques, electrodeposition provides an effective way to fabricate high-quality metal oxide thin films at low temperature and ambient atmosphere. Moreover, in this process, the deposition of metal oxide layers on the substrate is driven by the external electric field. Therefore, it is facile to precisely control the layer microstructure by this method and further design heterostructures with novel functionalities. To date, various methods including doping [9], interface engineering [10] and nanoparticle incorporation [11, 12] were used to improve the performance of RRAM devices.

Comments are closed.