8–1.2 pH units was
observed in solutions prepared GDC-0449 mw in PP syringes compared with 0.9–1.2 units for those prepared in glass and 1.6–1.8 units for those prepared in PVC bags. Table 2 Change over time in pH values of busulfan diluted in 0.9 % sodium chloride at a 0.55 mg/mL concentration Container Temperature (°C) Initial pHa pHa 6 h 12 h 18 h 24 h 30 h 36 h 42 h 48 h PP syringes 4 5.78 ± 0.01 5.39 ± 0.06 5,04 ± 0.01 5.09 ± 0.02 5.04 ± 0.03 4.99 ± 0.01 4.91 ± 0.01 4.93 ± 0.05 4.90 ± 0.08 13 5.70 ± 0.04 5.30 ± 0.02 5.08 ± 0.04 5.06 ± 0.05 5.09 ± 0.02 4.95 ± 0.04 4.99 ± 0.06 4.88 ± 0.06 4.99 ± 0.08 20 5.82 ± 0.07 5.23 ± 0.02 4.99 ± 0.02 5.03 ± 0.04 4.98 ± 0.03 4.87 ± 0.05 4.99 ± 0.08 4.85 ± 0.09 4.84 ± 0.02 PVC bags 4 6.77 ± 0,05 5.54 ± 0.14 5.44 ± 0.34 5.13 ± 0.03 5.12 ± 0.02 4.98 ± 0.06 5.05 ± 0.02 4.88 ± 0.10 5.02 ± 0.01 13 6.50 ± 0.11 5.33 ± 0.09 5.23 ± 0.21 5.15 ± 0.05
4.95 ± 0.04 4.88 ± 0.02 4.87 ± 0.02 4.86 ± 0.09 4.87 ± 0.04 20 6.49 ± 0.15 5.38 ± 0.05 5.04 ± 0.04 5.10 ± 0.06 4.86 ± 0.06 4.85 ± 0.06 4.87 ± 0.02 4.80 ± 0.07 4.87 ± 0.04 Glass bottles 4 6.10 ± 0.01 5.54 ± 0.02 5.17 ± 0.02 5.13 ± 0.03 5.14 ± 0.02 5.01 ± 0.06 4.93 ± 0.02 AZD2014 nmr 4.88 ± 0.02 4.90 ± 0.05 13 5.97 ± 0.03 5.43 ± 0.08 5.15 ± 0.01 5.10 ± 0.02 5.12 ± 0.01 4.90 ± 0.03 4.94 ± 0.02 4.88 ± 0.06 4.94 ± 0.04 20 5.94 ± 0.02 5.41 ± 0.05 5.14 ± 0.05 5.04 ± 0.03 5.04 ± 0.03 4.87 ± 0.10 4.90 ± 0.04 Sclareol 4.92 ± 0.01 5.04 ± 0.10
aValues presented as mean ± standard deviation (n = 4) PP polypropylene, PVC polyvinyl chloride Osmolarity changes (between 0 and 48 h) appear to be consistent with the stability described above: at 2–8 °C, there is no significant difference in osmolarity, regardless of the container used; at 13–15 °C, osmolarity is significantly different in PVC bags (p < 0.05, p = 0.002) and in glass bottles (p < 0.05, p = 0.003). At 12 h, in PVC bags stored at 2–8 °C, the busulfan content was 40.9 %, whereas after adding DMA the content increased to 85.9 %. In the same conditions, in PP syringes the content did not differ after adding DMA—100.3 % before vs. 104.5 % after.